en English

Galvanized Temporary Chain Link Fence Panels

Temporary Chain Link Fence Panels

1. Before order, you should know exactly chain link fence panels specs

  √  Panel Size: 6ft x 12ft, 6ft x 10ft, 6ft x 8ft, 8ft x10ft, 8ft x 12ft

  √  Galvanized Steel Frame: 1.25″/32 mm, 1.5″/38 mm, 1.6″/40 mm, 1-5/8″/42 mm round optional

  √  Chain Link Fabric Wire Diameter: 9 ga/2.9mm, 10.5 ga/2.7mm, 11 ga/2.3mm, 11.5 ga/2.2mm, 12 ga/2.0mm optional

  √  Temporary Fence Chain Link Size: 2″ (50 × 50 mm), 2.25″ (57 × 57 mm), 2.4″ (60 × 60 mm), 2.75″ (70 × 70 mm) optional

  √  Cross Brace: Vertical, horizontal brace with 1″/1.25’’ round or the same with frame O.D

  √  Stands: Galvanized or PVC coated

  √  Treatment: Pre-Galvanized pipe and panel welded, then galvanized spraying or hot dipped galvanized

  √  Standard 1: AS 1725-2010 Chain Link Fabric Security Fences and Gates

  √  Standard 2: AS 2423-2002 – Coated Steel Chain Link Fabric Products for Terrestrial, Aquatic, and General Use

  √  Standard 3: AS 54687-2007 –  Temporary Fencing and Hoarding

A drawing of chain link fence panels with brace and stands
Temporary Chain Link Fence With Stands

2. Usually there are 6 specs of chain link fence panels for your construction sites solutions

  √  6′ × 8′ temporary chain link fence: 11 gauge wire diam., 2″ mesh opening,  1-1/4″O.D. frame tube, no support.

  √  6′ × 10′ temporary chain link fence: 11.5 gauge wire diam., 2-3/8″ mesh opening,  1-3/8″O.D. 16 gauge frame tube, horizontal support.

  √  6′ × 12′ temporary chain link fence: 9 gauge wire diam., 2-2/5″ mesh opening,  1-1/4″O.D. frame tube, both support.

  √  6′ × 14′ temporary chain link fence: 9 gauge wire diam., 2-2/5″ mesh opening,  1-1/4″O.D. frame tube, both support.

  √  8′ × 10′ temporary chain link fence: 10.5 gauge wire diam., 2-2/5″ mesh opening,  1-1/2″O.D. frame tube, single or both support.

  √  8′ × 12′ temporary chain link panel fencing: 9 gauge wire diam., 2″ mesh opening,  1-1/4″O.D. frame tube, both support

3. Other 4 types Chain Link Fence Panels

Both bracing welded together with chain link mesh twine together
Fence Brace

Both cross Brace: 1" or 1.25'' O.D,14 Gauge wall thick Both vertical and horizontal bracing to impact strength from outside and wind to be a durable panels increasing the strength.

Galvanized stands installed with temporary chain link fence
Fence Stands

Galvanized 1-3/8" diameter tubing and welded into an approximate 16" x 36" rounded rectangles. With two smaller diameter uprights welded in place to accept the frame to ensure stability.

galvanized chain link fence clamps
Fence Clamp

The clamps made up of Pressed steel, 8 Gauge, Designed to join fence panels together, Hot-dipped galvanized silver color, Included 3/8" x 2-1/2" H.D.G. carriage bolt & nut; priced per Set, hot dip galvanized.

galvanized chain link fence gate installed with panels
Fence Gate

The Single or double swing fence gate is made up of chain link fence panel with necessary accessories, such as Post, rail ends, post cap, tension brand, tension bar,heel, loop cap, wheel, etc.

A hand points up the baebed wire at top of chain link fence
Barbed Wire For Fence

Cross Brace: 1" or 1.25'' O.D,14 Gauge wall thick
Both vertical and horizontal bracing to impact strength from outside and wind to be a durable panel. Hot dipped galvanized.

The shade cloth installed with chain link fence in front of house
Shade Cloth For Fence

The privacy fence windscreen is fit to 6ft or 8ft height chain link fences, which is polyethylene mesh to provide 88% privacy and 12% airflow,provide privacy and cut UV rays.

galvanized wire twine onto the frame for every hole
Wire Twine For Fence

Using the chain link wire is waved into the mesh, tie into a steel tube frame with the horizontal and vertical brace to support, then galvanized spraying paint on the welded point.

Temporary chain link fence panels in steel pallet loading into container by forklift
Pallet Loading For Fence

The galvanized temporary chain link fence panels packed with steel pallet with plastic belt, then use the forklift to carry onto the 40ft container and ship to America usually.

7-Day Fence Fast Delivery

Why can we do 7 days of proofing? Because we have over 10 welding platforms to produce fences every day, and a feet machine that can be stocked together to ship anytime.

And we have over 5 product experts with over 5 years of experience designing, they can be your sturdy backbone.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email “info@metalfencetech.com”.

Your Email is necessary!!! 

we want to
hear from you!