Galvanised Temp Fence Panel 240 x 210cm Econo 3mm 13kgs

Galvanised Temp Fence Panel 240 x 210cm

The 240 x 210cm econo 3mm galvanised temp fence panel complies with Australian Standard AS4687-2007 when installed with feet and clamps. The lighter temporary fence panel consists of Φ3.0mm wire diameter, 60 x 150mm anti-climb mesh aperture, and Φ32 O.D. frame tube with 1.3mm wall thick, 2100mm high, All  panel is pre-galvanised or hot dipped galvanised, hand full welded, then paint silver.  It is easy to install because of panel weight 13kgs for worker.

Because of large quantities production everyday with 10 welding platform since 2009, the temporary fence prices are much competitive.

When you in Australia or New Zealand, you can see Australian temporary fence Brisbane, temporary fencing perth, temporary fencing adelaide, temporary fencing melbourne

a picture of 3mm Galvanised Temp Fence Panel installed with feet and clamps in front of a women
3mm Galvanised Temp Fence Panel

Temporary Fence Panels, Plastic Base, Steel Clamp

1. 3.0mm Galvanised Temporary Fence Panels Specifications

Our Concerns

Temporary Fence Panels – Each Horizontal wire full welded onto the Mid-frame tube by twice, and vertical wire every 2 welded joints by twice to make the panel more strong.
In order to supply better price competitive, we bring in the Blow mould machine to produce

Feet – From the HDPE color, Color master batch, and UV additive, including the production wastage, we keep eyes on every details to make good design and quality.
When filled the concrete, we control the special rate with sand and concrete to match the weight of 26.5-28kgs, and clear the surface of feet.

DesignAustralia & New Zealand
MadeChina
1) Panel Specification
Panel Size2400mm(L) x 2100mm(H)
Frame32mm O.D. & 1.3mm Wall Thickness Galvanised to NZ standard 42 Microns
Infill Mesh3.0mm horizontal, 3.0mm vertical 150mm x 60mm spacing
TreatmentPre-Galvanised pipe and panel welded,then galvanized spraying
StandardAS&NZ 4687-2007
Weight/Panel13kgs
2) Plastic Temporary Fence Feet Specification
MaterialManufactured in high-density polyethylene 610 x 230 x 150mm
TreatmentUV2002, UV531 , BASF and UV770 treatment for anti-color-fading and sun protection , also outdoor use. The flexible & durable feet can last 3-5 years.
ColorOrange, Blue or Red, Green
Infill materialFilled in AUS&NZ with 30 mpa Concrete & 10mm chip
Infill concrete weight26.5-28kg
3) Clamp Specification
SizeSpecially moulded 4.0mm wall thickness for additional strength, 75mm, 80mm, 90mm, 100mm hole spacing(C/C)
TreatmentHot Dipped Galvanised
Weight0.42kg /set ( 2 pieces clips with 1 bolt and 1 nut)
 
4) Stays
1.5m or 1.8m height alternative, 32 x 1.3mm tube with 600 x 290 x 6.0mm steel plate full welded
Hot Dipped Galvanized to Australian Standard–42 Microns
Specially installed in very high winds.
Each Stay requires 2 Clamps and 2 Plastic Feet
5) PackingIn Steel Pallet
Qty In1x40’HC550 sets ( 1 panel + 1 foot with concrete + 1 clamp with bolt and nut)
 
6) Shipping Time15-20 days for 1 x 40’HC after receiving the deposit;

2. Steel Pallet of 3.0mm Cheap Temporary Fence Panels For Sale

There is rubber mat at the bottom of the pallet to avoid the pallet 
destroyed the panels, 4 metal corners to keep the pallet more strong

a picture of temporary fence steel pallet

3. Features of 3.0mm Temporary Security Fence Panels

√  Lightweight and low cost

√  Anti-climb mesh for added security

√  One worker quickly install

√  42 microns hot-dipped galvanized steel or Pre-galvanised 14 microns finish

√  Combine with feet, clamps, gates, bracing, stays, handrails

√  Export around Australia including Sydney, Melbourne, Brisbane Adelaide Perth, Darwin, and Auckland New Zealand

3. Application of 3.0mm Temporary Metal Fence Panels

The durable and strong temp fencing panels are popular in large construction sites, including concert and festival crowd control, event perimeters, environmental protection and general road , commercial and civil construction projects, large building,residential housing sites, and sporting events.

If Inquiry, please contact our friendly sales, you will get free quote and better price guarantree.

7-Day Fence Fast Delivery

Why can we do 7 days of proofing? Because we have over 10 welding platforms to produce fences every day, and a feet machine that can be stocked together to ship anytime.

And we have over 5 product experts with over 5 years of experience designing, they can be your sturdy backbone.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email “info@metalfencetech.com”.

Your Email is necessary!!! 

we want to
hear from you!